RGR1 aluminium rescue tripod complete with RGR7 50m Rescue Winch

RGR1 Rescue Tripod

The RGR1 Rescue Tripod is portable, lightweight and is easy to erect on site. It has adjustable lower and middle legs at 80mm intervals to adapt and adjust to the most demanding surfaces and varying ground conditions. There are two additional anchorage points ( SWL 200kgs each )on the underside of the head for additional primary / secondary systems.This unit has many applications such as confined access, entry, rescue, retrieval, manhole, silos & trenches, etc. The RGR1 is extremely versitile and is recomended for use with the side attachment of the RGR7 rescue winch and the RGR4 fall arrest & rescue recovery inertia reel.

Specification:

• Accredited To:EN795
• Material: Aluminium cast and extruded legs
• Fittings: EN795 attachment points
• Weight: 17.6 kgs
• Features: Portable and universally adjustable
• Min / Max Height : 1.68m - 2.67m
• Packed Length : 1.37m
• SWL: 200kg

RGR7 Rescue Winch

The RGR7 is fitted with an up/down clutch locking mechanism. Manufactured from steel with a baked enamel finish, the RGR7 has a 50cm per handle turn allowing for rapid retrieving/lowering of cable. This unit has many applications such as confined space entry, manholes and chemical vessels, etc.

The operative can be winched up or down to safety almost immediately. As most rescue systems lower the casualty, the RGR7 can raise the operative to safe area, if the area below is unsuitable.

The RGR7 is most commonly fitted to the RGR1 tripod for use in the confined access industry, as it can lower a worker into an area where no ladders are fitted.

The RGR 7 has a working length of 50 metres.

Specification:

• Accredited to:     EN 1496 A&B
• Cable Spec:     5mm Galvanized Steel Wire Rope
• Connector:     Double action. High tensile steel alloy
• Weight:     21.5 kg
• Features:     Clutch locking mechanism. Rapid retrieval/lowering of cable
• Gear ratio:     1 : 8 : 9
• Size mm:     L 220 x W 350 x D 220
• SWL:     200 kg