Next Generation Alsamex Modular Fall Arrest Unit Soft Landing System

• Easy to install and quick to check.
• Manufactured to ISO 9001:2000

The ALSAMEX FALL ARREST UNIT assists compliance with the HSE Work at Height Regulations 2005 and has been tested in accordance with PAS59 : 2004 dynamic performance (maximum deceleration, g force requirement) published by the BSI and impact tested using test method BS EN 364 : 1993.


Interconnected and modular, the ALSAMEX FALL ARREST UNIT is a tubular panel construction, made from highly durable material.

The outer cover is water resistant woven polypropylene. The units are filled with shock absorbent polystyrene loosefill.

The design includes high quality fixings and the product striping system gives a quick visual assurance of correct installation.

The integral system enables simple assembly to cover both large and small areas and is not reliant on outer perimeter constraints.

Specially designed dimensions of 2100mm length x 700mm roll diameter ensure easy handling and storage, fitting, and best cushioning performance.

Engineered interference fit when connected gives reliable fall protection over a given area.

No form of air filling or outside energy source is required – the protection is provided by the engineered cushion filling, manufactured by Alsamex.

The weight of each unit is light enough ( approx 7 kgs ) to enable safe and easy handling. Each consignment comes with full user guide.


Trailer Safety

Many Falls from trailers or platforms occur during loading and unloading
You don't have to fall far to land hard!

Alsamex Fall Arrest units do not require any external mechanical pumps or generators and can be installed in a wide range of applications, including trailer safety to protect personnel involved in loading & unloading vehicles on or above the load bed.

The installed units reduce the risk of potential injury to personnel by providing a collective soft landing area surrounding the trailer.




Alsamex Modular Fall Arrest Units are:

• Cost effective versus alternative solutions & systems
• Modular, so they can be configured to individual requirements e.g. configured for forklift unloading access
• Lightweight (approx 7kg) therefore can be installed and disconnected quickly to allow trailer access
• Weatherproof and can be used and stored inside or out
• Collective and passive so do not restrain or confine personnel under overhead loads
• Designed to enable multiple layers to be installed, where required
• Easily secured to external structures using the optional restraint attachments

Alsamex, the manufacturer of the ALSAMEX FALL ARREST UNIT, has been supplying products to the construction industry for more than 25 years.
Foam and cushioning products are at the heart of their business, with cushioning design and g force protection being part of their daily routine
for many years.

*Note
Price is for Individual units
Shipping times may vary on this product. Please Call 0800 678 5708 to confirm shipping schedule