SKU
802.201.02

Corpro RP100 Half Mask & Filters

P3 Mask

Various Sizes Available

£39.00 £46.80

Corpro RP100 Half Mask & Filters 

The Corpro Life Protection Systems RP100 Half Mask is innovatively designed with the end user in mind. Protective, comfortable and lightweight to wear our Half Mask is available in 3 sizes, with a full range of filters to choose from.
Having filters positioned on the sides of the Half Mask gives a much improved balance of weight for the user; important when wearing the mask for long periods of time.
Following extensive research using global fit profiling data the head harness ensures an excellent face fit. Combined with our ultra-low breathing resistance the RP100 Half Mask keeps users more comfortable, for longer.


FEATURES & BENEFITS

1. Comfortable and lightweight with an optimised centre of gravity for long usage times

2. Mask come in three sizes with a low profile head cradle – designed using global facial profiling data

3. Mask integrates seamlessly with other types of PPE

4. Harness locking system – allows users to maintain their pre-set fit and doffing of the mask without removing other PPE 5. Low breathing resistance – dual inhale valves and low pressure drop filters

6. Spares available for easy maintenance – longer product lifetime

7. Approvals 0086 / EN 140:1998 / AS/NZS1716:2012

Downloads: 

Data Sheet

Size Chart

Fit testing basics

What you need to do

The best time to do fit testing is at the initial selection stage, when individual users can be given a choice of adequate models of RPE. You should ensure that the make, model, type and size of facepiece that they wore when they had their successful fit test is made available for their use. If an employee wears more than one type of tight-fitting facepiece, then each type of facepiece should be fit tested.

As people come in all sorts of shapes and sizes it is unlikely that one particular type or size of RPE facepiece will fit everyone. Fit testing will ensure that the equipment selected is suitable for the wearer.

How to do it

RPE fit testing should be conducted by a competent person - you should take steps to ensure that person who carries out the fit test is appropriately trained, qualified and experienced, and is provided with appropriate information to undertake each particular task. The British Safety Industry Federation (BSIF) has introduced a scheme for fit testers, which may provide evidence to help you decide whether a fit tester is competent. 

A note on facial hair

Many masks rely on a good seal against the face so that, when you breathe air in, it is drawn into the filter material where the air is cleaned. If there are any gaps around the edges of the mask, ‘dirty’ air will pass through these gaps and into your lungs. It is therefore very important that you put your mask on correctly and check for a good fit every time.

Facial hair – stubble and beards – make it impossible to get a good seal of the mask to the face.

If you are clean-shaven when wearing tight-fitting masks (ie those which rely on a good seal to the face), this will help prevent leakage of contaminated air around the edges of the mask and into your lungs. You will therefore be breathing in clean air, which will help you stay healthy.

If there are good reasons for having a beard (eg for religious reasons), alternative forms of RPE, that do not rely on a tight fit to the face, are available.

More Information
Free Shipping
No
To Top