Search

0800 678 5708

Honeywell S3KUL3 Series 3000 Mkll and Mklll Transmitter

Industrial Gas Systems
Manufacturer: Honeywell
SKU: S3KUL3
£518.40 inc vat £432.00 excl vat
decrease increase

Honeywell S3KUL3 Series 3000 Mkll and Mklll Transmitter

Require Install, Commissioning, Calibration or Servicing?

Safety Gear Store are able to install, commission and service your fixed gas detection system. We offer a professional service from fully trained, certified and manufacturer approved engineers, we are also one of the only suppliers with engineers that carry spares in their vehicles to ensure a quick and efficient service that will enable you to continue using your facility.

For more information on what we offer please visit one of the below pages:

Fixed Gas Detection System Install and Commissioning

Fixed Gas Detection System Calibration and Servicing

S3KUL3 UL/cUL approved Series 3000 MkIII toxic and oxygen transmitter, Aluminium LM25 and 2 x 3/4”NPT entries

Series 3000 MkIII transmitter (Intrinsically Safe) is supplied complete with integral surface mounting lugs, 2 x 3/4”NPT or

2 x M20 conduit/cable entries (certification dependent), 1 x suitable blanking plug, 1 x hex wrench set, weatherproof cap,

operating  magnet, calibration and test certificate. Gas specific Sensor and accessories to be ordered separately.


2-wire loop powered toxic and Oxygen gas detector for use in potentially explosive atmospheres - explosion proof and intrinsically safe versions

Features & Benefits:
  • Reliable detection
  • Reduced installation costs
  • Reduced commissioning costs


Quick Specs:

  • Maximum dimensions 164mm x 201mm x 99mm (6.4” x 7.9” x 3.9”)
  • Operating humidity continuous 20-90% RH (non-condensing) 
  • Operating pressure 90-110kPa

Overview:

The Series 3000 range of transmitters provide comprehensive monitoring of toxic and Oxygen gas hazards in potentially explosive atmospheres. Suitable for mounting both indoors and out, they are available in two versions and offer excellent versatility. The MkII is contained in a flameproof housing, has an intrinsically safe sensor connection and is for use in predominantly Zone 1 applications. However with the use of the optional remote mounting kit the sensor of the MkII can be mounted in a Zone 0 environment. The MkIII is for use with a separate suitable IS barrier allowing the complete transmitter to be used in Zone 0 applications.

These low powered gas detectors all feature a loop powered 4-20 mA connection, making them ideal for both new and retrofit installations. Users can configure the detector through the use of the easy to read LCD and intuitive interface while fault diagnostic software and a programmable calibration period greatly simplify maintenance procedures.

Other products in this range include:

S3KAL3ATEX/IECEx approved Series 3000 MkIII toxic and oxygen transmitter, Aluminium LM25 and 2 x M20 entries
S3KAS3ATEX/IECEx approved Series 3000 MkIII toxic and oxygen transmitter, Stainless Steel 316 and 2 x M20 entries
S3KXSO1SSOxygen 0-25%v/v
S3KXSC1SSCarbon Monoxide 0-300ppm (100 to 500ppm, 100ppm)
S3KXSC2SSCarbon Monoxide 0-300ppm (100 to 999ppm, 100ppm)
S3KXSH1SSHydrogen Sulphide 0-15ppm (10 to 50ppm, 1ppm)
S3KXSH2SSHydrogen Sulphide 0-100ppm (50 to 500ppm, 10ppm)
S3KXSL1SSChlorine 0-5.0ppm (5.0 to 20.0ppm, 5.0ppm)
S3KXSS1SSSulphur Dioxide 0-15.0ppm (5.0 to 20.0ppm, 5.0ppm)
S3KXSX1SSChlorine Dioxide 0-1.00ppm
S3KXSM1SSNitrogen Monoxide 0-100ppm
S3KXSN1SSNitrogen Dioxide 0-10.0ppm (5.0 to 50.0ppm, 5.0ppm)
S3KXSG1SSHydrogen 0-1000ppm
S3KXSG2SSHydrogen 0-10,000ppm
S3KXSR1SSHydrogen Chloride 0-10ppm (10.0 to 20.0ppm, 1.0ppm)
S3KXSY1SSHydrogen Cyanide 0-30.0ppm
S3KXSF1SSHydrogen Fluoride 0-12.0ppm (10.0 to 12.0 ppm, 2 ppm)
S3KXSA1SSAmmonia 0-200ppm (50 to 200ppm, 50ppm)
S3KXSA2SSAmmonia 0-1000ppm (200 to 1000ppm, 50ppm)
S3KXSP1SSPhosphine (PH3) 0-1.2ppm (Fixed Scale)
S3KXSU1SSFluorine 4ppm
S3KXSE1SSEthylene Oxide (ETO), 25.0ppm (20.0 to 50.0ppm)
  
18.4 Accessories, Consumables and Spares
Accessories 
Part NumberDescription
SPXCDMTBRMounting bracket (inc. bolts, nuts, brackets)
SPXCDSDPSunshade / Deluge Protection
S3KCALCalibration cup (flow adapter) for Series 3000 and XNX EC toxic sensors
S3KCCCollecting cone (for Series 3000 & XNX EC toxic sensors) 
S3KDMKDuct mounting kit for Series 3000 and XNX EC toxic sensors
S3KWPWeatherproof housing with bump test port for use with Series 3000 and XNX EC toxic sensors
S3KRMKRemote mounting kit for Series 3000 and XNX EC toxic sensors including sensor connection unit fitted with 15m cable and connection plug for transmitter 
S3KRMK45Remote mounting kit for Series 3000 and XNX EC toxic sensors including sensor connection unit fitted with 45m cable and connection plug for transmitter (ATEX/UL/cUL approved)
SGPTPRMTL1Single channel zener barrier MTL7728+
SGPTPRMTL22 channel zener barrier MTL7787+
SGPTPRMTL3Galvanic Isolator MTL 5042
SGPTPRPFG1Galvanic Isolator P&F KFD2-STC4-EX1
90068-A-8204Gassing Block 316SST. 6mm O/D Connector to Sensor and 6mm Tube Connector to Gas Bottle
90068-C-8290PTFE Tubing 6mm O/D x 4mm I/D. Price per Meter
90068-C-8291PTFE Tubing 8mm O/D x 6mm I/D. Price per Meter
90068-C-8292Soft PVC Tubing 8mm O/D x 5mm I/D. Price per Meter
ADU300429Adaptor, ATEX, Ex d e, 316SS, M20 (male) to 1/2"NPT (female)
RDU303029Reducer, ATEX, Ex d e, 316SS, 3/4"NPT (male) to 1/2"NPT (female)
PDU300400ATEX & CSAUS Marked, Ex d e, 316SS, IP66, M20 Blanking Plug
PDU303000ATEX & CSAUS Marked, Ex d e, 316SS, IP66, 3/4" NPT Blanking Plug
X4S-2006662Field Device Tag Label (Based on Drawing Number 90084-C-7013).
Material: 316 Stainless Steel (Supplied loose & to be assigned at site)
Dimensions: 80x20x1.2mm (LxHxD)
Text Height & Length: 1 row of 5mm engraved text (Max. Characters of 15 off).
Note: Upon purchase order placement, please state the text per each tag required
Cell Exchange Kits
Part NumberDescription
S3KO1SSOxygen 0-25%v/v
S3KC1SSCarbon Monoxide 0-300ppm (100 to 999ppm, 100ppm)
S3KH1SSHydrogen Sulphide 0-15ppm (10 to 50ppm, 1ppm)
S3KH2SSHydrogen Sulphide 0-100ppm (50 to 500ppm, 10ppm)
S3KL1SSChlorine 0-5.0ppm (5.0 to 20.0ppm, 5.0ppm)
S3KS1SSSulphur Dioxide 0-15.0ppm (5.0 to 20.0ppm, 5.0ppm)
S3KX1SSChlorine Dioxide 0-1.00ppm
S3KM1SSNitrogen Monoxide 0-100ppm
S3KN1SSNitrogen Dioxide 0-10.0ppm (5.0 to 50.0ppm, 5.0ppm)
S3KG1SSHydrogen 0-1000ppm
S3KG2SSHydrogen 0-10,000ppm
S3KY1SSHydrogen Cyanide 0-30.0ppm
S3KF1SSHydrogen Fluoride 0-12.0ppm (Fixed Scale)
S3KR1SSHydrogen Chloride 0-10ppm (10.0 to 20.0ppm, 1.0ppm)
S3KA1SSAmmonia 0-200ppm (50 to 200ppm, 50ppm)
S3KA2SSAmmonia 0-1000ppm (200 to 1000ppm, 50ppm)
S3KP1SSPhosphine (PH3), 1.2ppm (Fixed Scale)
S3KU1SSFluorine 4ppm
S3KE1SSEthylene Oxide (ETO), 25.0ppm (20.0 to 50.0ppm)
  
Spares (Miscellaneous)
Part NumberDescription
S3KDMReplacement display module
S3KTMReplacement terminal module
S3KDM3Mk III Replacement display module
S3KTM3Mk III Replacement terminal module
S3KWPWeatherproof housing with bump test port for use with Series 3000 and XNX EC toxic sensors
SPXCDMAGMagnet
SPXCDHWESHex wrench for earth screw
SPXCDEBSEarth Bracket and Screws
S3KM20PM20 Blanking Plug
S3KNPTP3/4"NPT Blanking Plug

Honeywell S3KUL3 Series 3000 Mkll and Mklll Transmitter

Require Install, Commissioning, Calibration or Servicing?

Safety Gear Store are able to install, commission and service your fixed gas detection system. We offer a professional service from fully trained, certified and manufacturer approved engineers, we are also one of the only suppliers with engineers that carry spares in their vehicles to ensure a quick and efficient service that will enable you to continue using your facility.

For more information on what we offer please visit one of the below pages:

Fixed Gas Detection System Install and Commissioning

Fixed Gas Detection System Calibration and Servicing

S3KUL3 UL/cUL approved Series 3000 MkIII toxic and oxygen transmitter, Aluminium LM25 and 2 x 3/4”NPT entries

Series 3000 MkIII transmitter (Intrinsically Safe) is supplied complete with integral surface mounting lugs, 2 x 3/4”NPT or

2 x M20 conduit/cable entries (certification dependent), 1 x suitable blanking plug, 1 x hex wrench set, weatherproof cap,

operating  magnet, calibration and test certificate. Gas specific Sensor and accessories to be ordered separately.


2-wire loop powered toxic and Oxygen gas detector for use in potentially explosive atmospheres - explosion proof and intrinsically safe versions

Features & Benefits:
  • Reliable detection
  • Reduced installation costs
  • Reduced commissioning costs


Quick Specs:

  • Maximum dimensions 164mm x 201mm x 99mm (6.4” x 7.9” x 3.9”)
  • Operating humidity continuous 20-90% RH (non-condensing) 
  • Operating pressure 90-110kPa

Overview:

The Series 3000 range of transmitters provide comprehensive monitoring of toxic and Oxygen gas hazards in potentially explosive atmospheres. Suitable for mounting both indoors and out, they are available in two versions and offer excellent versatility. The MkII is contained in a flameproof housing, has an intrinsically safe sensor connection and is for use in predominantly Zone 1 applications. However with the use of the optional remote mounting kit the sensor of the MkII can be mounted in a Zone 0 environment. The MkIII is for use with a separate suitable IS barrier allowing the complete transmitter to be used in Zone 0 applications.

These low powered gas detectors all feature a loop powered 4-20 mA connection, making them ideal for both new and retrofit installations. Users can configure the detector through the use of the easy to read LCD and intuitive interface while fault diagnostic software and a programmable calibration period greatly simplify maintenance procedures.

Other products in this range include:

S3KAL3ATEX/IECEx approved Series 3000 MkIII toxic and oxygen transmitter, Aluminium LM25 and 2 x M20 entries
S3KAS3ATEX/IECEx approved Series 3000 MkIII toxic and oxygen transmitter, Stainless Steel 316 and 2 x M20 entries
S3KXSO1SSOxygen 0-25%v/v
S3KXSC1SSCarbon Monoxide 0-300ppm (100 to 500ppm, 100ppm)
S3KXSC2SSCarbon Monoxide 0-300ppm (100 to 999ppm, 100ppm)
S3KXSH1SSHydrogen Sulphide 0-15ppm (10 to 50ppm, 1ppm)
S3KXSH2SSHydrogen Sulphide 0-100ppm (50 to 500ppm, 10ppm)
S3KXSL1SSChlorine 0-5.0ppm (5.0 to 20.0ppm, 5.0ppm)
S3KXSS1SSSulphur Dioxide 0-15.0ppm (5.0 to 20.0ppm, 5.0ppm)
S3KXSX1SSChlorine Dioxide 0-1.00ppm
S3KXSM1SSNitrogen Monoxide 0-100ppm
S3KXSN1SSNitrogen Dioxide 0-10.0ppm (5.0 to 50.0ppm, 5.0ppm)
S3KXSG1SSHydrogen 0-1000ppm
S3KXSG2SSHydrogen 0-10,000ppm
S3KXSR1SSHydrogen Chloride 0-10ppm (10.0 to 20.0ppm, 1.0ppm)
S3KXSY1SSHydrogen Cyanide 0-30.0ppm
S3KXSF1SSHydrogen Fluoride 0-12.0ppm (10.0 to 12.0 ppm, 2 ppm)
S3KXSA1SSAmmonia 0-200ppm (50 to 200ppm, 50ppm)
S3KXSA2SSAmmonia 0-1000ppm (200 to 1000ppm, 50ppm)
S3KXSP1SSPhosphine (PH3) 0-1.2ppm (Fixed Scale)
S3KXSU1SSFluorine 4ppm
S3KXSE1SSEthylene Oxide (ETO), 25.0ppm (20.0 to 50.0ppm)
  
18.4 Accessories, Consumables and Spares
Accessories 
Part NumberDescription
SPXCDMTBRMounting bracket (inc. bolts, nuts, brackets)
SPXCDSDPSunshade / Deluge Protection
S3KCALCalibration cup (flow adapter) for Series 3000 and XNX EC toxic sensors
S3KCCCollecting cone (for Series 3000 & XNX EC toxic sensors) 
S3KDMKDuct mounting kit for Series 3000 and XNX EC toxic sensors
S3KWPWeatherproof housing with bump test port for use with Series 3000 and XNX EC toxic sensors
S3KRMKRemote mounting kit for Series 3000 and XNX EC toxic sensors including sensor connection unit fitted with 15m cable and connection plug for transmitter 
S3KRMK45Remote mounting kit for Series 3000 and XNX EC toxic sensors including sensor connection unit fitted with 45m cable and connection plug for transmitter (ATEX/UL/cUL approved)
SGPTPRMTL1Single channel zener barrier MTL7728+
SGPTPRMTL22 channel zener barrier MTL7787+
SGPTPRMTL3Galvanic Isolator MTL 5042
SGPTPRPFG1Galvanic Isolator P&F KFD2-STC4-EX1
90068-A-8204Gassing Block 316SST. 6mm O/D Connector to Sensor and 6mm Tube Connector to Gas Bottle
90068-C-8290PTFE Tubing 6mm O/D x 4mm I/D. Price per Meter
90068-C-8291PTFE Tubing 8mm O/D x 6mm I/D. Price per Meter
90068-C-8292Soft PVC Tubing 8mm O/D x 5mm I/D. Price per Meter
ADU300429Adaptor, ATEX, Ex d e, 316SS, M20 (male) to 1/2"NPT (female)
RDU303029Reducer, ATEX, Ex d e, 316SS, 3/4"NPT (male) to 1/2"NPT (female)
PDU300400ATEX & CSAUS Marked, Ex d e, 316SS, IP66, M20 Blanking Plug
PDU303000ATEX & CSAUS Marked, Ex d e, 316SS, IP66, 3/4" NPT Blanking Plug
X4S-2006662Field Device Tag Label (Based on Drawing Number 90084-C-7013).
Material: 316 Stainless Steel (Supplied loose & to be assigned at site)
Dimensions: 80x20x1.2mm (LxHxD)
Text Height & Length: 1 row of 5mm engraved text (Max. Characters of 15 off).
Note: Upon purchase order placement, please state the text per each tag required
Cell Exchange Kits
Part NumberDescription
S3KO1SSOxygen 0-25%v/v
S3KC1SSCarbon Monoxide 0-300ppm (100 to 999ppm, 100ppm)
S3KH1SSHydrogen Sulphide 0-15ppm (10 to 50ppm, 1ppm)
S3KH2SSHydrogen Sulphide 0-100ppm (50 to 500ppm, 10ppm)
S3KL1SSChlorine 0-5.0ppm (5.0 to 20.0ppm, 5.0ppm)
S3KS1SSSulphur Dioxide 0-15.0ppm (5.0 to 20.0ppm, 5.0ppm)
S3KX1SSChlorine Dioxide 0-1.00ppm
S3KM1SSNitrogen Monoxide 0-100ppm
S3KN1SSNitrogen Dioxide 0-10.0ppm (5.0 to 50.0ppm, 5.0ppm)
S3KG1SSHydrogen 0-1000ppm
S3KG2SSHydrogen 0-10,000ppm
S3KY1SSHydrogen Cyanide 0-30.0ppm
S3KF1SSHydrogen Fluoride 0-12.0ppm (Fixed Scale)
S3KR1SSHydrogen Chloride 0-10ppm (10.0 to 20.0ppm, 1.0ppm)
S3KA1SSAmmonia 0-200ppm (50 to 200ppm, 50ppm)
S3KA2SSAmmonia 0-1000ppm (200 to 1000ppm, 50ppm)
S3KP1SSPhosphine (PH3), 1.2ppm (Fixed Scale)
S3KU1SSFluorine 4ppm
S3KE1SSEthylene Oxide (ETO), 25.0ppm (20.0 to 50.0ppm)
  
Spares (Miscellaneous)
Part NumberDescription
S3KDMReplacement display module
S3KTMReplacement terminal module
S3KDM3Mk III Replacement display module
S3KTM3Mk III Replacement terminal module
S3KWPWeatherproof housing with bump test port for use with Series 3000 and XNX EC toxic sensors
SPXCDMAGMagnet
SPXCDHWESHex wrench for earth screw
SPXCDEBSEarth Bracket and Screws
S3KM20PM20 Blanking Plug
S3KNPTP3/4"NPT Blanking Plug

Products specifications
Series 3000 MkII InstrumentUL/c-UL Approved
Write your own review
  • Only registered users can write reviews
*
*
Bad
Excellent
*
*
*
Products specifications
Series 3000 MkII InstrumentUL/c-UL Approved
Filters
Sort
display