Search

0800 678 5708

ATEX Turbolite

ZONES: 1, 2, 21 AND 22
Type: ATEX Turbo Lite Lamp
Manufacturer: Wolf Safety
SKU: A-TL45A
£1,300.00 excl vat
£1560.00 inc vat
decrease increase

ATEX Turbolite

The ATEX Turbolite is a high power compressed air driven lamp for use in potentially explosive atmospheres and meets EN 1127 'explosion prevention and protection’ in Europe and FM class 3600 ‘electrical equipment for use in hazardous (classified) locations’ in the USA.

Wolf airlamps provide illumination for shotblasting, cleaning and coating of storage tanks and vessels and pipeline and structural engineering activities, offering a safer alternative to mains and low voltage lighting where explosive atmospheres present a serious risk to the workforce.   Light models include: Bay provides a high level of all-round general illumination and Flood has a matt reflector giving a wide-angle diffused beam.  Available in aluminium (A) or brass (B), usable in gassy mines and all lamps are nickel plated to protect against corrosion and are supplied with a bridle and safety hook fitted. 

The ATEX Turbolite is powered, purged, pressurised and cooled by compressed air controlled by an integral regulator, which passes through the lamp head and drives the turbine wheel by means of three nozzle plates. The turbine drives a magnet rotor within windings, generating the 24 Volt ac electrical supply which powers the 250 Watt halogen bulb. Major improvements over other models, include sealed bearings, refined regulator, greater use of stainless steel components, bulb-life enhancing device and silencer with a particle trap.

Special certification conditions: clean, dry compressed air and anti-static air hose are used to operate the lamp to minimise contamination inside the lamp and dangerous accumulation of static electricity and in potentially explosive dust atmospheres a ‘remote exhaust’ must be used, exhausting air to the safe area. Accessories available include anti-static hoses, filters and stands, tripods, setting and testing devices.

Features and Benefits:

  • CE marked to ATEX Directive, for use in zones 1 and 2 Hazardous Areas
  • Aluminium super-lightweight construction
  • 250 watt Halogen light output
  • Safe compressed air power source
  • Re-designed for greater reliability
  • Fitted with stainless steel exhaust silencer
  • Dust ignition protected for zones 21 and 22 using remote exhaust
  • Group I Mining approval with alternative brass construction
  • US Factory Mutual dual marking approval
 
Other products from this range available from SGS include:

A-TL45AAluminium Turbolite Floodlight
A-TL45B*Brass Turbolite Floodlight
A-TL44AAluminium Turbolite Baylight
A-TL44B*Brass Turbolite Baylight
A-6Screw, Air Inlet Plate A-105 (2 required)
A-7Screw for Stator (3 required)
A-8Wing Nut for A-11 (2 required)
A-11Bridle Bolt (2 required)
A-13SBridle with Safety Hook
A-18Stainless Steel Fastening Screw (9 required)
A-28Lock Nut for Regulating Screw
A-29Regulating Screw
A-33Air Filter Sieve
A-34Connecting Piece
A-38Turbine Wheel
A-52Insulating Bush (2 required)
A-54Stator Winding
A-57MReflector Matt
A-57PReflector Polished
A-68Pair of Pressure Regulating Keys
A-72Lock Washer for Bridle (2 required)
A-74Lockscrew for Reflector Head
A-77O' Ring Seal for Reflector Head
A-80Magnet
A-87Washer for Bulb Holder Studs (2 required)
A-98Collar for Lockscrew-piston Chamber
A-105Air Inlet Plate (3 required)
A-106O' Ring Seal for Air Inlet Plate (3 required)
A-109Air Regulating Plate
A-110Piston Complete
A-113Piston Spacer
A-114Spring for Piston (Silver Passivated)
A-115Diaphragm
A-116Lockscrew for Piston Chamber
A-129Bulb 24V 250W Tungsten Halogen
A-133Connecting Tube
A-134Overthrow Nut
A-139Grooved Rubber Washer
A-140Glass Disc 15mm (Toughened)
A-141Locktite 222
A-151Long Spring Bulbholder
A-152Short Spring Bulbholder
A-159Bulb 25V 250W Tungsten Halogen High Output
A-170Key for Fastening Screws A-18
A-TL44*Brass Turbolite Baylight
A-TL44LAluminium Turbolite Baylight
A-TL45*Brass Turbolite Floodlight
A-TL45LAluminium Turbolite Floodlight
A-6Screw, Air Inlet Plate A-26 (2 required)
A-7Screw for Stator (3 required)
A-8Wing Nut for A-11 (2 required)
A-11Bridle Bolt (2 required)
A-13SBridle with Safety Hook
A-16Metal Washer to Fit on No. A-17A
A-18Stainless Steel Fastening Screw (7 required)
A-19Ball Glass for A-TL44
A-21SHousing Cover
A-22Generator Housing
A-22GENComplete Generator
A-22KGenerator Housing Complete
A-23Reflector Head
A-23AReflector Head Assembly
A-24Lens Ring
A-28Lock Nut for Regulating Screw
A-29Regulating Screw
A-33Air Filter Sieve
A-34Connecting Piece
A-36Waved Spring Washer for Bearing (1 required)
A-37Nut for Rotor Shaft
A-38Turbine Wheel
A-40Ball Bearing with Race (2 required)
A-41Rotor Shaft
A-52Insulating Bush (2 required)
A-54Stator Winding
A-57MReflector Matt
A-57PReflector Polished
A-68Pair of Pressure Regulating Keys
A-72Lock Washer for Bridge (2 required)
A-74Lockscrew for Reflector Head
A-77O' Ring Seal for Reflector Head
A-80Magnet
A-85Rotor Assembly
A-87Washer for Connecting Screw (2 required)
A-88Nut for Connecting Screw (2 required)
A-89Pressure Regulating Piston only
A-90Rubber Seal for Piston
A-94Screw for Bearing Race in A55S
A-97Air Regulating Plate
A-98Collar for Lockscrew-piston Chamber
A-101Washer for Rotor Shaft Nut
A-102Rotor Spacer
A-105Air Inlet Plate (3 required)
A-106O' Ring Seal for Air Inlet Plate (3 required)
A-109Air Regulating Plate
A-110Piston Complete
A-113Piston Spacer

ATEX Turbolite

The ATEX Turbolite is a high power compressed air driven lamp for use in potentially explosive atmospheres and meets EN 1127 'explosion prevention and protection’ in Europe and FM class 3600 ‘electrical equipment for use in hazardous (classified) locations’ in the USA.

Wolf airlamps provide illumination for shotblasting, cleaning and coating of storage tanks and vessels and pipeline and structural engineering activities, offering a safer alternative to mains and low voltage lighting where explosive atmospheres present a serious risk to the workforce.   Light models include: Bay provides a high level of all-round general illumination and Flood has a matt reflector giving a wide-angle diffused beam.  Available in aluminium (A) or brass (B), usable in gassy mines and all lamps are nickel plated to protect against corrosion and are supplied with a bridle and safety hook fitted. 

The ATEX Turbolite is powered, purged, pressurised and cooled by compressed air controlled by an integral regulator, which passes through the lamp head and drives the turbine wheel by means of three nozzle plates. The turbine drives a magnet rotor within windings, generating the 24 Volt ac electrical supply which powers the 250 Watt halogen bulb. Major improvements over other models, include sealed bearings, refined regulator, greater use of stainless steel components, bulb-life enhancing device and silencer with a particle trap.

Special certification conditions: clean, dry compressed air and anti-static air hose are used to operate the lamp to minimise contamination inside the lamp and dangerous accumulation of static electricity and in potentially explosive dust atmospheres a ‘remote exhaust’ must be used, exhausting air to the safe area. Accessories available include anti-static hoses, filters and stands, tripods, setting and testing devices.

Features and Benefits:

  • CE marked to ATEX Directive, for use in zones 1 and 2 Hazardous Areas
  • Aluminium super-lightweight construction
  • 250 watt Halogen light output
  • Safe compressed air power source
  • Re-designed for greater reliability
  • Fitted with stainless steel exhaust silencer
  • Dust ignition protected for zones 21 and 22 using remote exhaust
  • Group I Mining approval with alternative brass construction
  • US Factory Mutual dual marking approval
 
Other products from this range available from SGS include:

A-TL45AAluminium Turbolite Floodlight
A-TL45B*Brass Turbolite Floodlight
A-TL44AAluminium Turbolite Baylight
A-TL44B*Brass Turbolite Baylight
A-6Screw, Air Inlet Plate A-105 (2 required)
A-7Screw for Stator (3 required)
A-8Wing Nut for A-11 (2 required)
A-11Bridle Bolt (2 required)
A-13SBridle with Safety Hook
A-18Stainless Steel Fastening Screw (9 required)
A-28Lock Nut for Regulating Screw
A-29Regulating Screw
A-33Air Filter Sieve
A-34Connecting Piece
A-38Turbine Wheel
A-52Insulating Bush (2 required)
A-54Stator Winding
A-57MReflector Matt
A-57PReflector Polished
A-68Pair of Pressure Regulating Keys
A-72Lock Washer for Bridle (2 required)
A-74Lockscrew for Reflector Head
A-77O' Ring Seal for Reflector Head
A-80Magnet
A-87Washer for Bulb Holder Studs (2 required)
A-98Collar for Lockscrew-piston Chamber
A-105Air Inlet Plate (3 required)
A-106O' Ring Seal for Air Inlet Plate (3 required)
A-109Air Regulating Plate
A-110Piston Complete
A-113Piston Spacer
A-114Spring for Piston (Silver Passivated)
A-115Diaphragm
A-116Lockscrew for Piston Chamber
A-129Bulb 24V 250W Tungsten Halogen
A-133Connecting Tube
A-134Overthrow Nut
A-139Grooved Rubber Washer
A-140Glass Disc 15mm (Toughened)
A-141Locktite 222
A-151Long Spring Bulbholder
A-152Short Spring Bulbholder
A-159Bulb 25V 250W Tungsten Halogen High Output
A-170Key for Fastening Screws A-18
A-TL44*Brass Turbolite Baylight
A-TL44LAluminium Turbolite Baylight
A-TL45*Brass Turbolite Floodlight
A-TL45LAluminium Turbolite Floodlight
A-6Screw, Air Inlet Plate A-26 (2 required)
A-7Screw for Stator (3 required)
A-8Wing Nut for A-11 (2 required)
A-11Bridle Bolt (2 required)
A-13SBridle with Safety Hook
A-16Metal Washer to Fit on No. A-17A
A-18Stainless Steel Fastening Screw (7 required)
A-19Ball Glass for A-TL44
A-21SHousing Cover
A-22Generator Housing
A-22GENComplete Generator
A-22KGenerator Housing Complete
A-23Reflector Head
A-23AReflector Head Assembly
A-24Lens Ring
A-28Lock Nut for Regulating Screw
A-29Regulating Screw
A-33Air Filter Sieve
A-34Connecting Piece
A-36Waved Spring Washer for Bearing (1 required)
A-37Nut for Rotor Shaft
A-38Turbine Wheel
A-40Ball Bearing with Race (2 required)
A-41Rotor Shaft
A-52Insulating Bush (2 required)
A-54Stator Winding
A-57MReflector Matt
A-57PReflector Polished
A-68Pair of Pressure Regulating Keys
A-72Lock Washer for Bridge (2 required)
A-74Lockscrew for Reflector Head
A-77O' Ring Seal for Reflector Head
A-80Magnet
A-85Rotor Assembly
A-87Washer for Connecting Screw (2 required)
A-88Nut for Connecting Screw (2 required)
A-89Pressure Regulating Piston only
A-90Rubber Seal for Piston
A-94Screw for Bearing Race in A55S
A-97Air Regulating Plate
A-98Collar for Lockscrew-piston Chamber
A-101Washer for Rotor Shaft Nut
A-102Rotor Spacer
A-105Air Inlet Plate (3 required)
A-106O' Ring Seal for Air Inlet Plate (3 required)
A-109Air Regulating Plate
A-110Piston Complete
A-113Piston Spacer
Products specifications
Lamp TypesAirlamps
*
*
*
Products specifications
Lamp TypesAirlamps
Filters
Sort
display