Product featured is I-test 1 x Gas inlet and T4 module for ATEX regional settings (CH4 set to 2.2%)
Ensuring your site is compliant I-Test is Crowcon’s newest solution to test and verify that your Gas-Pro and T4 are in a compliant state to carry out your daily work. Bump testing standards are getting tighter in all regions and the need for controlled bump and calibration records is a must. I-Test and the accompanying I-Test Manager software makes this as easy as can be. I-Test Automated Bump Test Station It takes less than 1 minute to complete a bump test with I-Test
Flexible mains powered, or battery back-up Allows you to use on site, or in field Entirely self-contained No extra computers or equipment required Ability to update Gas-Pro and T4 configurations Update the bump test interval or alarm levels of your fleet with ease and no fleet downtime Data management Archive gas level data from detectors long term Powerful support software Makes configuring I-Test to site requirements extremely easy.
Reliable I-Test recognises empty or expired cylinders Allows for planned refills and no unit downtime Testing starts automatically when detector is inserted Minimal user training required Ensures the audible and visual alarms are working Gives the user full confidence that the Gas-Pro is compliant to use Battery backup Testing continues even if power is out.
Records everything is logged See everything that has been tested and whether it has passed/failed Exception reporting Precise reports flag up who has and hasn’t carried out their bump test or calibration Powerful reporting Need to see which detectors have gone in to alarm in the last month? I-Test Manager makes easy work of pulling report summaries together.
Simple to use when the Gas-Pro or T4 are inserted into I-Test, no button presses are required and I-Test starts testing automatically. A bump test takes less than 1 minute. The test carries out verification that the sensors are responding to a known value of gas, and filters are clear and good for use. It will also ensure the audible and visual alarms are working, giving the user full confidence that they are compliant for site use.
Specification Size 110 x 250 x 320mm (4.3 x 9.8 x 12.6 ins)
Weight 2kg (70.5oz)
Input Supply 9-12V @ 3A I-Test backup battery 200 speedy bump tests with 15-second intervals between tests 5 hours in standby with no bump test Battery life approximately 500 cycles Charge time 7 hours
RTC backup battery 3-year life
USB interface One standard USB type A socket for USB Flash Memory stick One standard USB type B socket for connections to PC
Inlets/Outlets Single gas inlet (requires demand flow regulator) Purge inlet (air) Exhaust
Regulators Demand flow regulator required
Storage capacity Internal 2GB MicroSD card Temperature specifications
Operating temperature: -10o C to +50o C
Storage temperature: -25o C to +60o C
Charging temperature: 0o C to +40o C
Humidity 0% and 95% relative humidity (non-condensing) at +40o C
Ingress protection IP20
Other part numbers in this range include:
|IT-T4-11Z-ZB-2||I-Test 1 x gas inlet and T4 Module for UL Regional Settings|
(CH4 set to 2.5%)
|IT-T4-11Z-ZB-3||I-Test 1 x gas inlet and T4 Module for Inmtero Regional Settings (CH4 set to 2.2%)|