Search

0800 678 5708

Crowcon SMART3G-D2 - CO2 (Infrared sensor)

CO2, Infrared Sensor
Manufacturer: Crowcon
SKU: Crowcon Smart3G-D2 - CO2 Infrared
  • *
  • *
£1,271.00 excl vat
£1525.20 inc vat
decrease increase

Crowcon SMART3G-D2 - CO2 (Infrared sensor)


For a Full breakdown of all Crowcon SMART3G accessories, go HERE


Designed to meet with tough industrial requirements, the SMART3G-D2 allow to monitor toxic, flammable and refrigerant gas contents in harsh environments and classified areas. They offer a 4-digit back-lit display for the gas concentration reading, 5 mode status LED and a high visibility multi-color LED light ring.

Ideal in harsh environments, the SMART3G-D2 feature non- intrusive calibration for an accurate and easy adjustment via Hall-effect switches, without opening the instrument and declassifying the area.

They can reliably monitor flammable compounds (% LFL), toxic compounds in ppm, Oxygen and CO2 contents in % by Vol. They do also monitor refrigerant gases both in ppm and % LFL. The detectors are rated to IP65.


SMART3G-D2 features:

  • Non-intrusive one man calibration via Hall effect switches
  • 4-digit display and 5 mode status LEDs
  • Multi-color LED light ring
  • Standard 4-20 mA 3 wire output
  • Standard 3 relay output
  • Optional RS485 interface for Modbus communication.
  • Zero tracking to maintain the zero point steady from possible drifts
  • Ongoing system self diagnosis
  • ATEX II 2G Ex db IIC T5 Gb (standard marking) (II2 GD with optional adapter)
  • ATEX II 2G Ex db [ib] IIC T6 Gb for detectors with intrinsically safe protection
  • SIL 2HW & SIL3 SW certified
  • Wide range of sensors and detectable gases
  • Wide range of accessories for installation and maintenance
  • Easy sensor replacement

Crowcon SMART3G-D2 - CO2 (Infrared sensor)


For a Full breakdown of all Crowcon SMART3G accessories, go HERE


Designed to meet with tough industrial requirements, the SMART3G-D2 allow to monitor toxic, flammable and refrigerant gas contents in harsh environments and classified areas. They offer a 4-digit back-lit display for the gas concentration reading, 5 mode status LED and a high visibility multi-color LED light ring.

Ideal in harsh environments, the SMART3G-D2 feature non- intrusive calibration for an accurate and easy adjustment via Hall-effect switches, without opening the instrument and declassifying the area.

They can reliably monitor flammable compounds (% LFL), toxic compounds in ppm, Oxygen and CO2 contents in % by Vol. They do also monitor refrigerant gases both in ppm and % LFL. The detectors are rated to IP65.


SMART3G-D2 features:

  • Non-intrusive one man calibration via Hall effect switches
  • 4-digit display and 5 mode status LEDs
  • Multi-color LED light ring
  • Standard 4-20 mA 3 wire output
  • Standard 3 relay output
  • Optional RS485 interface for Modbus communication.
  • Zero tracking to maintain the zero point steady from possible drifts
  • Ongoing system self diagnosis
  • ATEX II 2G Ex db IIC T5 Gb (standard marking) (II2 GD with optional adapter)
  • ATEX II 2G Ex db [ib] IIC T6 Gb for detectors with intrinsically safe protection
  • SIL 2HW & SIL3 SW certified
  • Wide range of sensors and detectable gases
  • Wide range of accessories for installation and maintenance
  • Easy sensor replacement
Products specifications
Gases DetectedCarbon Dioxide (CO2)
*
*
*
Products specifications
Gases DetectedCarbon Dioxide (CO2)
Filters
Sort
display