Currency:

Crowcon Xgard Bright

Require Install, Commissioning, Calibration or Servicing?

Safety Gear Store are able to install, commission and service your fixed gas detection system. We offer a professional service from fully trained, certified and manufacturer approved engineers, we are also one of the only suppliers with engineers that carry spares in their vehicles to ensure a quick and efficient service that will enable you to continue using your facility.
For more information on what we offer please visit one of the below pages:

Fixed Gas Detection System Install and Commissioning

Fixed Gas Detection System Calibration and Servicing

Safety Gear Store will help you with with building your Xgard Bright if you require.

Below is an example of a product code for a Xgard Bright 0-100%LEL in aluminium enclosure with M20 cable entries, ATEX certification, HART communications, relay module and the display/manual in English would be: XGB-A1-01-A-HA-R-FD:

 

Configuration


Xgard Bright is a versatile platform offering flammable and toxic gas detection and oxygen monitoring, while providing ease of operation and reduced installation costs. 

Providing analogue 4-20mA and RS-485 Modbus signals as standard, Xgard Bright comes with an Alarm and Fault relay as standard as well as optional HART communications.

Lowering the cost of installation, the 3-wire addressable implementation drastically reduces cabling requirements. The large OLED display allows users to easily work with Xgard Bright during install, calibration and routine maintenance without the need to open the housing.

Overview:

This flameproof (Exd) detector is housed within our high-grade aluminium alloy case. Certifications include gas and dust approvals for ATEX and IECEX with UL gas certification in progress.

Versatile:

  • Flammable and toxic gas detection and oxygen monitoring – Reducing training requirements across sites
  • Choice of M20 or ½”NPT connection – Supports multiple site requirements
  • Low power requirement (~3W max) – Reducing site-wide power consumption
  • IP65 or IP66 rating (with weatherproof cap) – Allows use in areas subject to regular wash downs or in exposed environments

Ease of installation and operation:

  • Addressable – Drastically reduces the amount of cabling needed for multi-point installations
  • Local display – Delivers gas level indication, status and supports maintenance routines
  • Non-intrusive calibration – Removes the need to open the cover for calibration
  • Plug in type terminal blocks: Making wiring quick and easy reducing installation costs
  • Configuration via magnetic key – Reducing the amount of time operators spend in a hazardous area

Data Sheet

Specifications:

Size156 x 166 x 109mm (6.1 x 6.5 x 4.3inch)
Cable Entry2x M20 (stopping plug fitted to left-side entry) or supplied with ½” NPT adapters
Power10-30Vdc. 3W max
Electrical Output4-20mA current sink or source
WeightAluminium alloy 1kg (2.2lbs)
Enclosure MaterialADC 12 aluminium alloy
RelayAlarm 1, Alarm 2, Fault

 

SPST contacts rated 1A 30Vdc

Sounder Out24Vdc (nominally), 2A maximum load.
Operating Temperature-40°C to +70°C (-40°F to 158°F)

 

Note: sensor operating temperatures vary widely.

Refer to the sensor module datasheet or contact

Crowcon for specific sensor data.

Humidity0 to 95% RH, non-condensing
Repeatability+/- 2% FSD
Zero drift+/- 2% FSD per year maximum
Ingress protectionIP65 & IP66 (with weatherproof cap)
ApprovalsATEX and IECEx

 

Ex II 2G Ex db IIC T6 Gb

Ex II 2D Ex tb IIIC T80°C Db

Certificate numbers:

TUV 16 ATEX 7908 X

IECEx TUR 16.0035 X

EMC ComplianceEN50270:2015
StandardsEN60079-0:2012 + A11:2013

 

EN60079-1:2014

EN60079-31:2014

IEC60079-0:2017 Edition 7

IEC60079-1:2014-06

IEC60079-31:2013

ZonesCertified for use in Zone 1 and Zone 2 areas


Sensor Options:

Pellistor sensors
FDMethane 0-100% LEL
Oxygen sensors
OAOxygen 0-25% VOL 
Electrochemical sensors 
AEHydrogen Sulphide 0-10ppm 
AAHydrogen Sulphide 0-25ppm 
ABHydrogen Sulphide 0-50ppm 
ACHydrogen Sulphide 0-100ppm 
ADHydrogen Sulphide 0-200ppm 
AHCarbon Monoxide 0-50ppm 
AICarbon Monoxide 0-100ppm 
AJCarbon Monoxide 0-200ppm
AKCarbon Monoxide 0-250ppm 
ALCarbon Monoxide 0-500ppm
AMCarbon Monoxide 0-1000ppm
AN

Carbon Monoxide 0-2000ppm

 



Products specifications
Attribute nameAttribute value
Xgard TypeXgard Bright
Gases DetectedMethane (CH4), Pentane (C5H12), Hydrogen (H2), Combustible Gases, Ethane (C2H6), Ethylene (C2H4), Oxygen (O2), Hydrogen Sulphide (H2S), Carbon Monoxide (CO), Carbon Dioxide (CO2), Propane (C3H8), Butane (C4H10), Ammonia (NH3), Chlorine (CL2), Ozone (O3), Sulphur Dioxide (SO2), Hydrogen Cyanide (HCN), Hydrogen Peroxide (H2O2), Nitrogen Dioxide (NO2), Nitric Oxide (NO), Chlorine Dioxide (CLO2)

Crowcon Xgard Bright

Product page currently under construction
Please email or call for up to date pricing
Xgard Bright
Multiple gas detection options
Manufacturer: Crowcon
SKU: XGB
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Call for pricing

Crowcon Xgard Bright

Call for pricing
Picture of Fast Delivery

Fast Delivery

Next day delevery for shown as in stock orders placed before 1:00pm

Picture of Worldwide Shipping

Worldwide Shipping

Place a purchase order, Call or email to get an international shipping quote

Picture of Secure Online Purchasing

Secure Online Purchasing

SECURED BY SECTIGO (We do not accept AMEX)

Picture of Technical Support

Technical Support

Call or email to speak to a member of the technical team