Scott Safety Sigma-Vision Breathing Apparatus Kit

This kit from Scott Safety includes everything required for a compatible functioning set up between Mask, breathing apparatus and breathing air.

The kit consists of:

• Scott Safety Sigma Breathing Apparatus
• Scott Safety Vision 3 Mask
• Scott Safety 6Ltr 300 Bar Steel Cylinder Sigma
  
  

Scott Sigma 2 Type 2

• Consists of Carrying Harness, Backplate and the Pneumatic System
• Compatible with Various Facemasks
• Protection in any IDLH-type environment
• CE Marked with EN 137:2006 type 2
• Hands-free bypass facility
• Dimensions: 600mm x 278mm x 200mm
• Weighs 2.3kg
  
  

The Scott Sigma 2 type 2 is an open circuit SCBA which can be configured in a number of different ways with different cylinders and masks. The system consists of a carrying harness, backplate and the pneumatic system contains a reducer with integrated cylinder connector, demand valve, pressure gauge and whistle. This unit can be used with the following facemasks; Panaseal, Vision 3, Panavisor and Promask PP.

The Sigma 2 type 2 has been designed for use in marine industrial firefighting environments but is also suitable for providing protection in any IDLH-type environment.

It is CE marked in compliance with EN 137:2006 type 2.

This unit is equipped with a Tempest demand valve, which is a compact, positive pressure demand valve, which features a servo-assisted tilting diaphragm mechanism and low inspiratory resistance and responsive dynamic performance.

It also features automatic first - breath actuation and hands-free bypass facility. The demand valve is manufactured from injection moulded polyamide with rubber seals and diagrams. The pressure indicator is a Bourdon tube type dial indicator, which includes a heat and impact resistant polycarbonate lens, safety blowout vent in the rear of the gauge.

The dimensions are 600 mm x 278 mm x 200 mm and the unit weighs 2.3 kg without the cylinder.

Scott Safety Vision 3 Mask

It is constructed from scratch and impact resistant polycarbonate with a flame retardant coating and gives excellent wide-angle vision. The visor is secured in place by two U-shaped clamps and the mask is made from liquid silicon rubber with a reflex seal and TPE ori-nasal inner mask.

It has been designed for use with the Scott safety breathing apparatus from the SCBA professional firefighting range as well as the airline and escape breathing apparatus range. It is suitable for providing high-quality respiratory protection in IDLH- type environments.

The ergonomic design allows a user with spectacles to use the mask without compromising the seal and it is available with either a two-point adjustable Polyester/Kevlar net style harness or five point Neoprene strap style harness that is fully adjustable.

It features a bayonet connection on the left- hand side for the demand valve and has the option of a right- hand quick- fit port for connecting a communications interface, if needed.

The inhale valve flaps are made from silicon rubber, exhale valve flaps are poly isoprene rubber in a polyamide valve housing, the valve spring is made from stainless steel.

• The packaged dimensions are 265 mm x 190 mm x 150 mm and it weighs 0.75 kg.
• The vision 3 is certified to AS/NZS 1716: 2012 when used along with the Scott safety SCBA .
• It is also CE marked in accordance with EN 137:2006 class 2, when in use with the ProPak, Contour or ACS system.
• It is also CE marked in accordance with EN 137 when in use with the Scott safety airline system.
  
  

Scott Safety 9ltr 207 Bar Steel Cylinder Sigma

6.0 litre, 300 bar, steel cylinder, CE specification, painted to BS specification, complete with cylinder valve fitted with safety locking handwheel. 1640 litre free air capacity providing total duration of 41 minutes

A dangerous goods carriage charge will also need to be applied for some outlying areas, Highlands, Channel Islands, Northern Ireland and offshore isles.

Data Sheet - Vision 3