Tiger Air Trolley

T series trolleys are designed specifically for mining, industrial and general engineering applications.

The trolleys are available in plain, geared and motorized versions and can be supplied with rigid or hook on adaptors.

They have a minimum factor of safety of 5 at the maximum rated load and are therefore suitable for use with both manual and powered hoists.

The trolleys comply with the requirements of SANS 1824, EN13157 and EN14492-2.

The manufacturing facility producing the trolleys is ISO9001 certified.

Key Features

• 1, 3, 6 and 10 tonne capacity units
• Low headroom, compact and versatile
• Available in plain, geared and motorised versions
• Greater than 5:1 factor of safety
• Anti-fall, anti-derailment and anti-tilt features as standard

Precise Control

Infinitely variable control offers precise speed control from creep to full speed. The maximum allowable traverse speed can also be set on the trolley control valve.

Emergency Stop

All trolleys can be supplied with an emergency stop device as an option. This shuts off the main air supply to the trolley when activated. Resetting the device will not automatically restart the traverse operation.

Low Headroom

Compact design reduces headroom. Rigid adaptor further reduces headroom.

Versatility

Trolley fits a wide variety of beam widths. They can accommodate both parallel and tapered flange beams. Hook on adaptor allows any hoist up to trolley capacity to be attached.

Vane Motor

Assisted vane lifting ensures maximum starting torque when starting under load. The motor is not affected by wet or damp operating conditions. Built in silencer limits noise level to 76dB(A).

Automatic Stopping

Motorised traverse drive stops automatically due to the worm drive when the air supply is shut off. Additional traverse brake is optional.

Small Turn Radius

Trolleys can negotiate small turn radii in the support beam.

Technical Information